FAQ  •  Search  •  Profile  •  Log in to check your private messages  •  Log in
 GW-USMicro300 View next topic
View previous topic
Post new topicReply to topic
Author Message
Kai Beginner
Kai Beginner

Joined: 25 Sep 2013
Posts: 1

PostPosted: Wed Sep 25, 2013 4:16 am Reply with quoteBack to top

I'm trying really hard to make my usb wireless adapter work with my windows 7, but as it is in 64 bits it has been a real pain.

once I installed the normal steps following this guide: file:///C:/Program%20Files%20%28x86%29/PLANEX%20ClientManager/HelpE/html/64bit_windows.html

it still does not recognise the driver, and I tryied to unistall it, however everytime I do it it displays this:


then if I try to install the driver by the given methods on the page above it just simply said that the driver was alredy installed (it obviously isn't since Client magaer still says that there is not an environment for XLink Kai)

THEN if I try just to remove the driver from the same window (Device Magaer) and try to reinstall it, is displays this:


the image lines read:

"Windows encountered a problem while trying to install the device driver"

windows found a software driver for the device, but there was an error while trying to install it


The name is alredy used as a name of a service or as a name to show services

that was a rough translations of everything in that last picture...

I need some help on it since I've been tryng for hours just to install this..

Any help is pretty apprecianted
View user's profileSend private message
Kai Regular
Kai Regular

Joined: 02 Jan 2006
Posts: 172

PostPosted: Fri May 16, 2014 4:50 pm Reply with quoteBack to top

Try installing MediaTek (Ralink) driver after uninstalling PLANEX driver and utility.

You can download the latest version of the device driver for GW-USMicro300 (Ralink RT3072, VID:2019, PID:AB29, FCCID:MQ4WU5208) from MediaTek web site.
    1. Open http://www.mediatek.com/en/downloads/ in your browser.
    2. Select USB (RT2870/ RT2770/ RT307X/ ...) for Windows in the driver list.
    3. Input Your Name, Your Email and words, click SUBMIT


Make sure to configure compatibility mode and privilege level.
    1. Right-click the IS_AP_STA_RT2870_D-*.exe and choose Properties.
    2. In the Properties Panel, click the Compatibility tab.
    3. Place a check in the Compatibility Mode checkbox.
    4. Select Windows XP (Service Pack 3) in the mode box.
    5. In the Privilege Level section, place a check in the Run this Program as an Administrator checkbox.
    6. Click Apply to save your changes.


Run IS_AP_STA_RT2870_D-*.exe after changing the compatibility mode.
    1. In License Agreement, choose 'I accept ...', click Next.
    2. In Setup Type, choose Install driver only, click Next.
    3. In InstallShield Wizard Complete, choose 'Yes, I want to restart ...', click Finish.

Next, make sure to configure PSP XLink Mode in the device driver after restarting your computer.
    1. Open Device Manager.
    2. Right-click GW-USMicro300 and choose Properties.
    3. In the Properties Panel, click the Advanced tab.
    4. Select PSP Xlink Mode in the Property box.
    5. Change Value to Enable.
    6. Click Apply to save your changes.


Finally, you'll be able to connect to your PSP/PSVita by wireless network in Windows 7.
    1. Click wireless network icon in the right side of the taskbar.
    2. Select PSP SSID in Wireless Network Connection list.
    3. Click Connect to link your PSP/PSVita.



XLinkKai on Linux ( http://www37.atwiki.jp/linux_kai/ )
View user's profileSend private message
Display posts from previous:      
Post new topicReply to topic

 Jump to:   

View next topic
View previous topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Powered by phpBB © 2001, 2002 phpBB Group :: Theme by Daz :: All times are GMT