Author |
Message |
BowFury
Kai Beginner
Joined: 25 Nov 2012
Posts: 3
|
Posted:
Sun Nov 25, 2012 11:03 am |
|
My info: Laptop winows Xp 32bit
PSP 1000 6.60 pro b10
Game:Monster Hunter Portable 3rd
Modem: Scientific-Atlanta Cable Modem SA DPC2434
I setup Microsoft loopback adapter, join the online hall,
setup the bridge. The Bridge sees my psp and says connection:ok
and kai detects my PSP in the metrics tab(shows a pic of a PSP and my mc adress)
and i try to join a game but, i dont see anyone in the hall
and also people say they dont see my ping(one of them told me if i can see their ping than that means im connected fine..wich i would see the persons ping, than he said that i probably cant connect because of a bug)
Idk what they really are for...but i tried bouth pssdk and wincap and same results. re started Kai many times, rebooted my laptop multiple times aswell.
also someone told me its probably because i have to port forward..and i had done it...this is what i did(incase i missed something)
went into my router, went into "Port Forwarding" put the Local IP Adr(same IP as the loopback adapter), Start port to 30000 and end 30000, protocol bouth TCP and UDP then enabled it, lastly apply. thats all my router let me fill up idk if i have to do anything els on it.
(also promted the cmb and typed in ipconfig /all so i could check if the ip adress was free...wich it was. just in case aswell)
it also says reachable: not yet, idk if that means anYhting...i remeber a week ago i tried conencting using 5.00 m33-6 and i didnt really try to hard to get this up and running...but i think it kai did see my psp and i remeber it says reachable: yes...
this is the guide i used: http://www.teamxlink.co.uk/forum/viewtopic.php?t=39808
EDIT: i think its because of the Reachable: not yet saw other posts on this problem
-BF |
Last edited by BowFury on Sun Nov 25, 2012 12:17 pm; edited 1 time in total |
|
|
|
BowFury
Kai Beginner
Joined: 25 Nov 2012
Posts: 3
|
Posted:
Sun Nov 25, 2012 12:04 pm |
|
ima re try this, swiched the protocol to UDP insted of bouth UDP AND TCP, and see what happens
and also can anyone tell me what you have to do to get back on xlink kai ones you get everything running, lets say you turn of your computer and come back on do you have to re install PSP B driver or what? like what would the order of thing to do be..
thnx for the help
-BF
EDIT: ALSO when i start the bridge it says:
1:singleThread(if multi thread is unstable)
2:singleThread(not use)
the guide i use doesnt even show this...i go with 1..idk lol? |
|
|
|
|
giggyprince
Team XLink Moderator
Joined: 27 Feb 2011
Posts: 1206
|
Posted:
Tue Nov 27, 2012 1:22 pm |
|
|
|
|
|
|
View next topic
View previous topic
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB
© 2001, 2002 phpBB Group :: Theme by Daz ::
All times are GMT
| |