BSOD! Blue Screen Of Death

Kai Beginner Joined: 20 May 2009 Posts: 4

Hi,
i used xlink kai with no problems to last deaths server.
Now, if I use xlink kai, i have blue screen of death!
I can't normally play, I go on a mission but i have BSOD and the computer restarts. I had it 20 times already and I have enough, please help

I'm playing Monster Hunter Freedom 2 on PSP
i read many topics (example: http://www.teamxlink.co.uk/forum/viewtopic.php?t=24056 ) but i'm not founded solution.
i'm tried reinstall zydas and kai drivers :/
What I should do?

please help, and sorry for my English

Team XLink Clan Manager Joined: 03 Aug 2006 Posts: 1595

Have you identified the IRQ conflict? that is the likely cause.

Also, have you tried turning "Zero config" on? The Zydas has it turned off, and that was one solution posted.

what type of network card(s) do you have? brand?

give some more info. what have you tried thus far?

-Kove

Kai Beginner Joined: 20 May 2009 Posts: 4

(-TU-)Kovert-xX wrote:

Have you identified the IRQ conflict? that is the likely cause.

I don't understand this

my card is Asmax usb wifi

I'm trying reinstall drivers, turn off zydas ,run Zero config on, and turn off display BSODs but this not work :/

Kai Beginner Joined: 20 May 2009 Posts: 4

please help Sad

Kai Lover Joined: 23 Dec 2007 Posts: 911

When you put in the device do you hear a noise through windows saying its connected but then craps out after hearing it 3 or so times (BSOD)? if so its windows surge protection setup.

What happens is when the device that's connected to the usb input of your computer disconnects and reconnects it will think that the device isn't properly connected or a bad connection from the pads within the device or the usb interface of your computer.
I've had this happen with devices many of times and well the only way to fix it is to either put the usb dongle on a extended usb cable or if its the dongle device you would have to send it back or send in for repair.

Kai Beginner Joined: 20 May 2009 Posts: 4

If the device is plugged in, but is not running xlink kai, BSOD does not occur.
If it is turned on xlink kai, but the device is plugged out, just BSOD does not occur

But before problem with xlink kai's server, I haven't got this problem :/
My many friends have got this same device and they haven't got this problem

Kai Beginner Joined: 17 May 2009 Posts: 9

He also gets infos about attack at his comp. from kaspersky Wink