Joined: 20 Jul 2005
Posts: 1
Location: United Kingdom
Posted:
Sun Jul 24, 2005 10:36 pm
Hi - if anyone can help, I'd appreciate it!
Is your network reachable?
Yes
Are you using a port-forward?
No
Is your console being detected?
Yes
Brief description of your network setup (include model numbers):
WGR54G Router connected to PC host running Kai via CAT5
WGA54G bridge connected to XBOX
Do you use a software firewall? What brand? Have you made any changes to it?
Yes, using Kerio Personal Firewall. Have allowed unrestricted access for Kaiengine.exe (all ports & protocols). Also tried disabling firewall completely.
Operating System?
XPSP2
Problem description?
Xbox connects to PC okay and shows xlink orbital server. Kai shows network reachable = yes.
Have tried setting port forward on router but this doesn't improve things...
Since you are bridging the connection from your PC to your xbox, you might be required to imput MAC translation. Hit wireless in the Kai Config and find the mac addresses. Also, it might be needed to tick "Dangerous NICs", but do a Trial and Error as this isn't completely 100% sure.
TwoCents Team XLink Administrator
Joined: 27 Aug 2004
Posts: 1826
Posted:
Sat Jul 30, 2005 9:31 am
Make sure to portforward UDP port 30000 on the router to the computer running the Kai Engine. Set Kai Port=30000 in Kai Config Too.
Next test without the usage of the bridge. Wire your xbox to the router and use Diagnostic Mode in Kai to check if Network Reachable=Yes and xbox is found.
View next topic View previous topic
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum