| Author |
Message |
ZIGU_90
Kai Beginner
Joined: 31 May 2014
Posts: 24
|
 Posted:
Fri Jun 20, 2014 11:31 am |
  |
Is your network reachable? yes
Are you using a router? yes
Did you set a static IP on the PC running Kai? yes
Did you forward port 30000 to the static IP? yes
Did you click the globe after forwarding to see if your network goes reachable? yes
What console are you using? PSP 2000
Is your console being detected? not with wireless adapter, yes with usbadhoc plugin and usb cable
Brief description of your network setup: psp to asus usb n13 on windows 7 32bit pc, then pc wired to adsl router
Model numbers of the router, and modem? netgear dgn2200v4
Do you use a software firewall? What brand? Have you made any changes to it? no firewall
Operating System? Windows 7 professional 32 bit
Problem description? tried asus win7 drivers that doesn't have xlink mode, tried then XP asus drivers that have it, enabled xlink mode, when selecting the adapter in xlink kai configuration after confirmation the program close and doesn't start again until I disconnect the USB n13 device, tried the complete guide for belkin installing the RALINK drivers RT2870 chipset here http://www.teamxlink.co.uk/forum/viewtopic.php?t=39724 there was another guide that suggested to install these drivers instead of asus ones, with Ralink drivers the device disconnects itself from the pc after less than one minute (as if I unplugged it)
COPY AND PASTE CONTENTS OF kaiUserConfig.txt HERE
# XLink Kai Engine Configuration
# Version 7.4.28
[KaiUserConfig]
# Username for automatic login
kaiUsername=ZIGU_90
# Password for automatic login
kaiPassword=xxxxxxxxxxxx (alright to delete it here?)
# Use automatic login
kaiAutoLogin=1
# Use Web User Interface instead of GUI program
kaiWebUI=1
# Automatically launch Kai user interface
kaiLaunchUI=1
# User interface program name
kaiUI=kaiUI.exe
# Web UI Password
kaiHTTPPassword=!
# Web UI Skin
kaiSkin=!
# Automatically open chat
kaiAutoOpenChat=0
# Enable PSP Mode (Automatic SSID detection)
kaiPSPMode=0
# Disable sleep mode
kaiDisableSleep=1
# MBCS code page for asian character sets
kaiCodepage=0
# Language
kaiLanguage=en
# Enable port address translation
kaiPAT=0
# Set UDP port for peer-to-peer connections (0=random)
kaiPort=30000
# Set TCP port for Web UI connections (connect with http://127.0.0.1:[portnumber]/)
# Default is 34522 - this does not need to be changed in most cases. You DO NOT need to forward this port in your router.
kaiWebUIPort=34522
# Autodetect Proxy Server
kaiProxyAutoDetect=0
# Proxy server IP address
kaiProxyServer=!
# Proxy server port
kaiProxyPort=0
# Network adapter (!=autodetect)
kaiAdapter=\Device\NPF_{F450ED44-9C94-4B5A-AF45-0187206681E6}
# Automatically shut down engine after x minutes (0=never)
kaiTimeout=0
# Automatically shut down engine when UI closes
kaiUIClose=0
# Accept connections from user interfaces on other computers
kaiAcceptRemote=0 |
Last edited by ZIGU_90 on Sun Jun 22, 2014 9:50 am; edited 1 time in total |
|
  |
|
karmic
Kai Regular
Joined: 02 Jan 2006
Posts: 172
|
| Posted:
Fri Jun 20, 2014 1:05 pm |
|
|
|
|
ZIGU_90
Kai Beginner
Joined: 31 May 2014
Posts: 24
|
| Posted:
Fri Jun 20, 2014 2:04 pm |
|
Thank you very much for your reply, I have the B1, so it doesn't have that chipset, no wonders now why the driver didn't work, shall I search for Realtek RTL8192CU drivers? Will this chipset work?
(On a side note I installed the asus xp drivers using the manual method browsing the cd)
Installed the correct drivers from realtek website, activate xlink psp mode, rebooted the pc, started kai, selected the usb device in the options and when confirming kai stops to work and need to unplug the device in order to use kai again, so same as the asus drivers for XP in the CD
 |
|
|
|
|
karmic
Kai Regular
Joined: 02 Jan 2006
Posts: 172
|
| Posted:
Fri Jun 20, 2014 6:30 pm |
|
|
|
|
ZIGU_90
Kai Beginner
Joined: 31 May 2014
Posts: 24
|
| Posted:
Fri Jun 20, 2014 6:52 pm |
|
| karmic wrote: |
GJ 
And you need the screenshot of Network Adapter List in Kai Config. Can you take it? |
Unfortunately every xp driver I install gives the same problem (also tried using again the cd with the wizard but with every .exe set in windows xp sp2 compatibility mode because I found out there are three drivers for xp in the cd in different folders, strange).
The problem appears when I hit the SAVE button, the program crash and doesn't start again until the asus usb n13 is disconnected, I changed a little of the options as shown in this screenshots:
What if I make a dual boot system with also Windows XP? |
|
|
|
|
karmic
Kai Regular
Joined: 02 Jan 2006
Posts: 172
|
| Posted:
Fri Jun 20, 2014 7:31 pm |
|
|
|
|
ZIGU_90
Kai Beginner
Joined: 31 May 2014
Posts: 24
|
| Posted:
Fri Jun 20, 2014 7:50 pm |
|
Reinstalled Kai from the beginning (same version), deleted the appdata/roamin/xlink kai folder, run ccleaner registry fix, disabled all the other network devices, start kai with usb asus n13 connected and.... refuses to boot even for the "first" time! Trying now the older version of kai you suggested, thank you very much for your effort and your time.
UPDATE: installed the older version you suggested and I am getting an error code (picture below) and in addition to that, when I select the usb n13 in the configuration gives me again the error message, but I can manage to start kai and the adapter is correctly shown when I click "metric", I am in monster hunter room1, connect the pc to
PSP_AULES..... etc but psp isn't recognized by kai, it is like this:
orbital name: The Third Amigo
reachable: Yes
local ip: 94.36.204.21
local port: 30000
engine version: 7.4.26
pssdk/winpcap: Windows/PSSDK
signed by: team xlink
ethernet adapter: ASUS USB-N13 300Mbps 11n Wireless USB dongle
locked: 1
up engine traffic: 0
down engine traffic: 8
up chat traffic: 0
down chat traffic: 0
up orb traffic: 0
down orb traffic: 0
pssdk/winpcap (again?): PSSDK
mac cache entrie: 0
broadcast traffic inbound: 0
broadcast traffic outbound: 0
unicast traffic inbound: 0
unicast traffic outbound: 0
wireless SSID:
Found Consoles:
 |
|
|
|
|
karmic
Kai Regular
Joined: 02 Jan 2006
Posts: 172
|
| Posted:
Fri Jun 20, 2014 9:34 pm |
|
|
|
|
ZIGU_90
Kai Beginner
Joined: 31 May 2014
Posts: 24
|
| Posted:
Sat Jun 21, 2014 8:55 am |
|
That error is now gone, but the PSP is still not recognized, in the wireless device I set up ip:10.0.0.1 and SM:255.255.255.0, tried also enabling PAT |
|
|
|
|
karmic
Kai Regular
Joined: 02 Jan 2006
Posts: 172
|
| Posted:
Sat Jun 21, 2014 10:07 am |
|
| ZIGU_90 wrote: |
| but the PSP is still not recognized, in the wireless device I set up ip:10.0.0.1 and SM:255.255.255.0, tried also enabling PAT |
Try this.
address:169.254.0.1, netmask:255.255.0.0 |
_________________
XLinkKai on Linux ( http://www37.atwiki.jp/linux_kai/ ) |
|
|
|
ZIGU_90
Kai Beginner
Joined: 31 May 2014
Posts: 24
|
| Posted:
Sat Jun 21, 2014 11:03 am |
|
| karmic wrote: |
| ZIGU_90 wrote: |
| but the PSP is still not recognized, in the wireless device I set up ip:10.0.0.1 and SM:255.255.255.0, tried also enabling PAT |
Try this.
address:169.254.0.1, netmask:255.255.0.0 |
It still doesn't work, but I noticed that in the network card folder says wireless network connected but says not identified network.
I successfully played 3 matches with a guy in MHFU today using the cable and the connection was very good.
EDIT!!!! SUCCESS!! I don't use DHCP server, so it was disabled, maybe it was the problem, you supposed I had that enabled maybe? I can see the MAC of the PSP with blue background in metric!
put an ip of my network and used the static ip of the pc running KAI as gateway and dns server, still need to try a real game with other people but it worked already with the cable, there shouldn't be problems at all!
 |
|
|
|
|
alfredox123
Kai Beginner
Joined: 27 Jan 2020
Posts: 2
|
| Posted:
Mon Feb 10, 2020 5:41 am |
|
have you tested with real people yet? im trying to make this work to with same adapter b1 version
did you use in the end asus drivers or realtek drivers? and which one |
|
|
|
|
|
|
