FAQ  •  Search  •  Profile  •  Log in to check your private messages  •  Log in
 Can't set up Xlink Kai on Windows XP with wireless laptop. View next topic
View previous topic
Post new topicReply to topic
Author Message
Bombernook
Kai Beginner
Kai Beginner


Joined: 13 May 2013
Posts: 5

PostPosted: Sat May 25, 2013 9:23 am Reply with quoteBack to top

Is your network reachable? No
Are you using a router? A Modem from AT&T U-verse
Did you set a static IP on the PC running Kai? Using Wireless Laptop
Did you forward port 30000 to the static IP? Did not get that far
Did you click the globe after forwarding to see if your network goes reachable? Did not get that far
What console are you using? PS3
Is your console being detected? Did not get that far
Brief description of your network setup: I have a modem from AT&T U-Verse that my laptop is connected to wirelessly in a different room where my PS3 is. The PS3 is connected to the laptop and laptop is connected wirelessly to the modem that is in a completely different room. Laptop cannot be wired to modem as modem is far away in a different room than where PS3 set up is.
Model numbers of the router, and modem? Using AT&T U-Verse Modem
Do you use a software firewall? What brand? Have you made any changes to it? N/A
Operating System? Windows XP
Problem description? Cannot configure Network Bridge for my set up to work with Windows XP. Cannot find any instructions to make Kai work with XP using a wireless laptop connected to a modem and a PS3 connected via Ethernet cable to the wireless laptop. Need help in configuring bridge connection for wireless internet access via the bridge using windows xp to get XLINK KAI to work with my set up.

Thank You.
View user's profileSend private message
Dominator94
Kai Regular
Kai Regular


Joined: 02 Jun 2012
Posts: 87

PostPosted: Sat May 25, 2013 5:52 pm Reply with quoteBack to top

You don't need to bridge it. You just will need to change your network adapter to the Ethernet port your PS3 plug into.
View user's profileSend private message
Bombernook
Kai Beginner
Kai Beginner


Joined: 13 May 2013
Posts: 5

PostPosted: Sun May 26, 2013 5:31 am Reply with quoteBack to top

Dominator94 wrote:
You don't need to bridge it. You just will need to change your network adapter to the Ethernet port your PS3 plug into.


How do you do that? Any step-by-step instructions on how to get XLINK Kai working with this set up?
Many thanks and advise.
View user's profileSend private message
Dominator94
Kai Regular
Kai Regular


Joined: 02 Jun 2012
Posts: 87

PostPosted: Sun May 26, 2013 6:00 pm Reply with quoteBack to top

Start XLink. Go to this address in your internet browser http://127.0.0.1:34522/config.htm . Look under your Network Settings and change the network adapter to the adapter you PS3 plug in to. If you not sure won't one post a list of all your network adapters here.
View user's profileSend private message
giggyprince
Team XLink Moderator
Team XLink Moderator


Joined: 27 Feb 2011
Posts: 1206

PostPosted: Tue May 28, 2013 3:14 pm Reply with quoteBack to top

Should also be working for xp
http://www.youtube.com/watch?v=itxywqrJqb8
View user's profileSend private message
Display posts from previous:      
Post new topicReply to topic


 Jump to:   



View next topic
View previous topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group :: Theme by Daz :: All times are GMT