[SOLVED] Buffalo Port Forward.

Kai Beginner Joined: 21 Oct 2009 Posts: 14

Hi there I'm Gaan and I am unable to get port forwarding to work.
I am on XP.

I have followed these guides: http://www.teamxlink.co.uk/forum/viewtopic.php?t=26897 http://www.teamxlink.co.uk/forum/viewtopic.php?t=26897 http://www.teamxlink.co.uk/forum/viewtopic.php?t=33951&sid=910f373bd54f4334acf9ccb3919129fc

I also followed the guide at Portfoward.

Non of the guides worked for me and I believe it is because either my computer or Buffalo WHR-G54S will not accept static IP changes or port forwarding.

I am fairly sure that I set up the static IP correctly as I followed a guide. Not sure where to find the guide but if anyone wants I could post my info from command prompt.

Buffalo gives me the options:
TCP
UDP
LAN IP Address: Auto and Manual

When I put 30000 into TCP and UDP it says "ERROR: WAN Side TCP/UDP Port
CONTENTS: Invalid WAN side TCP/UDP port"

Does anyone know what I need to do?

Posted: Wed Oct 21, 2009 5:13 am

Follow this http://portforward.com/english/routers/port_forwarding/Buffalo/WHR-HP-G54/Xlink_Kai.htm

Kai Beginner Joined: 21 Oct 2009 Posts: 14

I had done that guide before but missed something. Thank you for sending me back there! I got Kai working and did two missions~